How Many Watts Does A Reciprocating Saw Use?
A Reciprocating Saw uses 1100 watts running, 1800 watts surge when it starts, with 25% duty cycle.
Quick Answer Box:
- Running Watts: 1100W
- Starting / Surge Watts: 1800W
- Running Amps: 9.17A @ 120V
- Duty Cycle: 25%
- Daily kWh for 8 hours @ 25%: 2.200 kWh
How Much Does It Cost to Run a Reciprocating Saw?
Formula: `Watts x duty x hours / 1000 x $/kWh = cost`
At $0.15/kWh:
| Usage | kWh per Day | Cost per Day @ $0.15 | Cost per Month @ $0.15 | Cost per Month @ $0.30 |
|---|---|---|---|---|
| 4 hrs/day | 1.100 kWh | $0.165 | $4.95 | $9.90 |
| 8 hrs/day | 2.200 kWh | $0.330 | $9.90 | $19.80 |
| 24 hrs/day @ 25% | 6.600 kWh | $0.990 | $29.70 | $59.40 |
At California $0.45/kWh, 8 hours a day costs $29.70 per month.
Can a Portable Power Station Run a Reciprocating Saw?
No. A reciprocating saw needs 1100W continuous and 1800W surge. None of the 0 stations in your file pass – they all fail continuous or surge.
You need at least 1320W continuous and 2160W surge. A 3000W+ inverter generator is required.
What Size Generator Do You Need for a Reciprocating Saw?
Minimum 1375W continuous, 2250W surge. No portable power station in your list passes.
2 Tips to Save Power on a Reciprocating Saw Only
1. Use eco/low mode. Most reciprocating saw have eco setting that uses 30-50% less watts for same result.
2. Unplug when not in use and clean regularly. Phantom draw 1-3W plus dust adds 5% load.
FAQ
Can any power station run a reciprocating saw?
No station in your file can. Needs 1100W continuous, 1800W surge. Requires 3000W+ generator.
Do I need pure sine wave for a reciprocating saw?
Yes for electronics and motors. Modified sine wave like MARBERO 88Wh and Azocek 220W causes buzz, heat, and may shorten life. Anker, BLUETTI, EcoFlow, Jackery are pure sine wave.