How Many Watts Does A GoPro Battery Charger Use?
A GoPro Battery Charger uses 10 watts running, 0 watts surge, with 100% duty cycle.
Quick Answer Box:
- Running Watts: 10W
- Starting / Surge Watts: 0W
- Running Amps: 0.08A @ 120V
- Duty Cycle: 100%
- Daily kWh for 4 hours: 0.040 kWh
How Much Does It Cost to Run a GoPro Battery Charger?
Formula: `Watts x duty x hours / 1000 x $/kWh = cost`
At $0.15/kWh:
| Usage | kWh per Day | Cost per Day @ $0.15 | Cost per Month @ $0.15 | Cost per Month @ $0.30 |
|---|---|---|---|---|
| 2 hrs/day | 0.020 kWh | $0.003 | $0.09 | $0.18 |
| 4 hrs/day | 0.040 kWh | $0.006 | $0.18 | $0.36 |
| 8 hrs/day | 0.080 kWh | $0.012 | $0.36 | $0.72 |
At California $0.45/kWh, 8 hours a day costs $1.08 per month.
Can a Portable Power Station Run a GoPro Battery Charger?
No. A gopro battery charger needs 10W continuous and 0W surge. None of the 0 stations in your file pass – they all fail continuous or surge.
You need at least 12W continuous and 0W surge. A 3000W+ inverter generator is required.
What Size Generator Do You Need for a GoPro Battery Charger?
Minimum 12W continuous, 12W surge. No portable power station in your list passes.
2 Tips to Save Power on a GoPro Battery Charger Only
1. Use USB-C PD direct, not AC brick. Direct DC saves 15% inverter loss and keeps station silent.
2. Unplug when full. Charger at idle draws 1-3W phantom. Strip off saves that.
FAQ
Can any power station run a gopro battery charger?
No station in your file can. Needs 10W continuous, 0W surge. Requires 3000W+ generator.
Do I need pure sine wave for a gopro battery charger?
Yes for electronics and motors. Modified sine wave like MARBERO 88Wh and Azocek 220W causes buzz, heat, and may shorten life. Anker, BLUETTI, EcoFlow, Jackery are pure sine wave.